Once Carbon Monoxide is detected you will be alerted by phone, SMS by App notification and the base station siren will ring.
Monthly Archives: March 2022
How do I Install the Carbon Monoxide Alarm?
Using Screw fixings – Choose the installation location, first make two holes in the ceiling or wall, then insert the wall plugs into the holes. Insert the screws into the holes of the plate, screw tightly to fix the bracket firmly. Fit the battery into the battery holder of the alarm, align the back of […]
Can I use the Carbon Monoxide Alarm without the Alarm Base Station?
No, the Carbon Monoxide Alarm can only be used with our Alarm Base Station in order to receive the alerts messages should the alarm be triggered.
How do I pair the Carbon Monoxide Alarm with my Alarm Base Station?
Ensure the Alarm Base Station is plugged in and turned on: STEP 1. From the App on your phone, on Alarm home screen tap Accessories > +, then the base station goes into the pairing/sniffer mode with all indicators blinking. STEP 2. Place batteries into the alarm, and before its 20 second sniffer countdown expires, […]
How do I install my PIR sensor?
Mounting height – Motion sensor should be mounted 2m to 2.2m above the floor. Mount the bracket with the Adhesive pads or screws provided. Fit the motion sensor in the bracket and set the direction of the detection range of the motion sensor. Do not install the PIR Motion sensor outdoors or on glass. PIR […]
How do I pair a PIR with my Alarm Base Station?
Ensure the Base Station is plugged in and turned on. STEP 1. At your device home screen in the App tap Accessories > +, then the base station goes into the pairing/sniffer mode with all indicators blinking. STEP 2. Trigger the wireless PIR motion sensor that you wish to add to send a transmission signal […]
How to Pair the Door and Window Sensor?
Firstly, power on the sensors. Open the back of the Door/Window sensor and turn on the sensor using the black switch below the battery and refit the back. Once all sensors in the box have been powered on, they will automatically be paired and added to your App. (Tap on Accessories, to check the alarms […]
What is the Switch Overcharge in Settings?
Switch Overcharge gives your device overcharge protection. The socket automatically discontinues charging your device such as mobile phones or power banks when they are fully charged. The overcharge protection function prevents potential safety issues caused by overcharging and helps prolong battery life. Provide you with a more secure and worry-free device charging experience.
What is the Relay Status in Settings?
Relay Status lets you set that after a power outage, with relay status Off, the plug will not turn on automatically when the power returns. If the relay status is On, it will power back on. For most appliances, set Relay Status to On.
What is the Switch Log in Settings?
Switch Log provides a log of each time the device turned on and off for the current month.