With the TP Link plugged into the wall socket, press and hold its Pair button for more than 15 seconds until the Power LED goes off momentarily and comes back on.
Category: Getting Started
How do I install the SOS Emergency Panic Button?
To install the SOS button push the rectangular double-sided adhesive pad from the circular pad and use the rectangular pad to fix the SOS button. Peel the paper from one side of the double-sided pad and stick the pad to the rectangular center of the SOS button, pressing firmly to ensure a good bond. Peel […]
How do I pair the SOS Emergency Panic Button with my Alarm Base Station?
Ensure the Alarm Base Station is plugged in and turned on: STEP 1. From the App on your phone, on Alarm home screen tap Accessories > +, then the base station goes into the pairing/sniffer mode with all indicators blinking. STEP 2. Trigger the Panic Button you wish to add, to send a transmission signal […]
How do I pair the RFID Tags?
The RFID tags supplied with the system are paired with the keypad. If they are unpaired or you want to pair more tags, you can pair the tag with your keypad as following. STEP 1. Enter the admin passcode then press √. STEP 2. Press 1 then √. STEP 3. Enter a digit from 0 […]
How do I set up the Keypad?
When fully charged, remove the USB charger and push the On/Off switch to the On position, as indicated in the below picture. Once powered on the Keypad should automatically be paired and added to your App.
How do I connect the alarm panel?
Connecting to your Wi-Fi Please have the name and password ready for the Wi-Fi you wish to connect to, this should be the same Wi-Fi that your mobile phone is also connected to during set up. The sensors included in the Alarm base station box will automatically pair once powered on, see below. STEP 1. […]
How do I install the Alarm panel?
Remove the bracket from the back of the base station. Fit the double-sided adhesive pad to the back of the bracket and press the bracket onto your chosen location. Once the bracket is secure, fit the keypad onto the bracket. If using screws, remove the bracket from the base station and screw the bracket to […]
How do I charge the wireless Keypad?
How do I pair the SOS Emergency Button Wristband with my Alarm Base Station?
Pairing your SOS Emergency Button Wristband Installation Ensure the Alarm Base Station is plugged in and turned on: STEP 1. From the App on your phone, on Alarm home screen tap Accessories > +, then the base station goes into the pairing/sniffer mode with all indicators blinking. STEP 2. Trigger the SOS Emergency Button that […]
How do I Install the Carbon Monoxide Alarm?
Using Screw fixings – Choose the installation location, first make two holes in the ceiling or wall, then insert the wall plugs into the holes. Insert the screws into the holes of the plate, screw tightly to fix the bracket firmly. Fit the battery into the battery holder of the alarm, align the back of […]